PRODUCTS :
Share This |
Facebook Tweet This MySpcae Google

Corrosorber®

Description: Corrosorber® absorbs hydrogen sulfide, volatile mercaptans, and other corrosive gases, removing them from the atmosphere and eliminating the cause of some damage to metals. The chemicals contained in Corrosorber® have been treated to change color from off-white to black as corrosive gases are trapped. Corrosorber® will not interfere with VpCI® protection. Unlike other products on the market, Corrosorber® will not release the corrosive gases back into the atmosphere. The reaction is irreversible, eliminating any concern about post-contamination..

Package: Corrosorbers are plastic selfstick devices covered with a breathable membrane. Diameter: 2.3” (5.8 cm). Height: 1.27” (3.2 cm). Individually wrapped and shipped 10 cups per carton. To ensure best product performance, store in original packaging, indoors, and out of direct sunlight at 40-100 °F (4-38 °C). Shelf life: 2 years


Product Data Sheet

Corrosorber.pdf

Safety Data Sheet



Cor-Pak® 1-MUL

Description: Multifunctional inhibitor pouch with VpCI®/desiccant action 2.5" L x 2.5" W x 125" H (6.4 cm x 6.4 cm x 0.3 cm).

Protection: 1.0 ft.3/pouch (0.028 cubic meters)

Package: 1.0 ft3 (.03 m3).1.0 ft3 (.03 m3).300/carton


Product Data Sheet

Cor-Pak 1MUL Pouches.pdf

Safety Data Sheet



Corwipe® 500

Description: Corwipe® 500 is a revolutionary wipe which removes light rust, grease, oil and dust, while leaving behind a protective antistatic and thin VpCI® (Vapor phase Corrosion Inhibitor ) film. The static dissipative film will drain charges when properly grounded, and reduce triboelectric voltage to less than 300 volts.

Application: Corwipe ® 500 is designed to clean,protect and maintain products,components or assemblies.

Package: Corwipe® 500 Pouches are supplied 144 units per carton (12 wipes per pouch, 12 pouches per carton).


Product Data Sheet

Corwipe 500.pdf

Safety Data Sheet



Eco-Corr Film® ESD-Biodegradable VpCI® Permanent Films & Bags

Description: Eco-Corr Film® ESD are biodegradable and compostable highperformance anti-static, corrosion inhibiting film and bags for use in the protection of static sensitive multi-metal items such as electronics. They contain permanent anti-static properties to immediately reduce or eliminate static buildup as long as the films or bags are in use, independent of the presence of humidity. They also form a molecular corrosion inhibiting layer on metal substrates and do not interfere with the physical or chemical properties of electronic components.


Package: Available in custom-size bags (heat-sealable), film, and tubing. Thicknesses range from 50- 120 microns. To ensure best product performance, store in original packaging, indoors, and out of direct sunlight at 4-38 °C. Shelf life: 2 years


Product Data Sheet

EcoCorr ESD.pdf

Safety Data Sheet



Eco Works® ESD - Patented Compostable Films & Bags

Description: Eco Works® ESD is a range of formulations, not a single product and can be customized to your precise needs. Designed with the environment in mind, Eco Works® ESD contains renewable raw materials ranging from 5 – 45%, depending upon the formulation as well as anti-static properties, which reduce or eliminate static buildup. Designed to replace traditional low density and high density films, Eco Works® ESD is suitable for industrial uses..


Application: Eco Works® ESD film and bags are recommended for packaging of staticsensitive components where triboelectric charge generation is concern. They are recommended for packaging integrated circuits, printed circuit boards, PCB components, telecommunications equipment, electronic and electrical panels, and enclosures.


Product Data Sheet

EcoWorks ESD.pdf

Safety Data Sheet



EcoSonic® VpCI®-125 HP

Description: EcoSonic® VpCI®-125 HP Permanent ESD Films and Bags are high-performance anti-static, corrosion inhibiting film and bags for use in the protection of static sensitive multi-metal items such as electronics. They contain permanent anti-static properties to immediately reduce or eliminate static buildup as long as the films or bags are in use,

Package: Available in custom-size bags (heat-sealable or zipper closure), film, and tubing. Thicknesses range from 2-6 mils (50-150 microns); maximum tube size: 50” (1.3 m).

Product Data Sheet

EcoSonic-VpCI-125.pdf

Safety Data Sheet



ElectiCorr® VpCI®-238 Multi-Metal Cleaner/Protector

Description: Multifunctional formulation providing three-way protection: multimetal corrosion protection, anti-static and cleaning action. Corrosion inhibiting spray provides dry, ultra thin, protective film. For use in enclosed environments on electronic equipment and components. Will not alter electrical resistance, magnetic or thermal properties.

Application: Integrated circuitry, bus bars, electrical stations

Package:12 oz. (340 gram) aerosol


Product Data Sheet

Electricorr 238.pdf

Safety Data Sheet



ElectiCorr® VpCI®-239 Extreme Environment/Outdoor Cleaner

Description: Outdoor version of VpCI®-238

Application: Integrated circuitry, bus bars, outdoor electrical connections

Package:12 oz. (340 gram) aerosol or EcoSpray® 238 pump spray, 16 oz. (0.47 liter), 5 gallon (19 liter) pails and 55 gallon (208 liter) drums.


Product Data Sheet

Electricorr 239.pdf

Safety Data Sheet



ElectriCorr® VpCI®-248 Non-Flammable Cleaner/Protectant

Description: Designed for use in a sheltered environment, ElectriCorr® VpCI®-248 continuous vapor action saves money by extending product life and eliminating downtime due to corrosion.

Application: Electrical panels; Electronic enclosures; tool and spare part boxes; electromechanical controls, switch gear and relay cabinets.

Package: 9.45 oz. cans


Product Data Sheet

Electricorr248.pdf

Safety Data Sheet



ElectiCorr® VpCI®-286 Acrylic Conformal Coating

Description: Nonconductive acrylic conformal coating that combines excellent moisture and corrosion resistance with Cortec’s patented vapor corrosion inhibitor technology.

Application: Extends circuit board life, contains no VOC's and is vibration resistant.

Package:11 oz. aerosol cans (312 gram), 5 gallon (19 liters) pails, 55 gallon (208 liters) drums, totes and bulk.


Product Data Sheet

Electricorr 286.pdf

Safety Data Sheet



VpCI®-101 Emitter

Description: Unique dual action: desiccant/VpCI® protection. VpCI® impregnated foam for multimetal protection. Comes with adhesive backing and individually packaged in plastic. Each device is 1.25" (32 mm) wide, 3" (76 mm) long, and 0.25" (6 mm) thick. Use one device per 1.0 cu. ft. (28 l) of enclosed space. Nitrite free, non-toxic, non-polluting.

Application: Marine navigation and communication equipment, Aerospace electrical controls, Electric motors, Switching equipment, Fuse boxes and power boxes.

Package: 50/carton

Product Data Sheet

101.pdf

Safety Data Sheet

Tech Data & Approvals

Canada FDA Information
SGS Report: Chinese
SGS Report: English



VpCI®-105 Emitter

Description: Unique dual action: desiccant/VpCI® protection. Tyvek® breathable membrane, plastic cartridge filled with nitrite free VpCI®, for multimetal protection. Comes with adhesive backing and is individually packaged in plastic. The VpCI®-105 emitters are compact to fit modern electronic enclosures [2.3" (58 mm) in diameter and .75" (19 mm) high]. Use one emitter for 5 cu. ft. (142 l) of enclosed space.

Application: Operating, packaged and stored electrical equipment, marine navigation and communication equipment, aerospace electrical controls, electric motors, switching equipment, fuse boxes, medical equipment, electrical wireways, terminal boxes, scientific and measuring instruments, telecommunications equipment, control panels for manufacturing and processing equipment.

Package: 20/carton

Product Data Sheet

105.pdf

Safety Data Sheet

Tech Data & Approvals

FDA Information
SGS Report: Chinese
SGS Report: English



VpCI®-111 Emitter

Description: Unique dual action: desiccant/VpCI® protection. Tyvek® breathable membrane, plastic cartridge filled with nitrite free VpCI®, for multimetal protection. Comes with adhesive backing and is individually packaged in plastic. VpCI®-111 [2.3" (58 mm) in diameter and 1.27" (32 mm) high]. Protects 11 cu. ft. (311 l).

Application: Operating, packaged and stored electrical equipment, marine navigation and communication equipment, aerospace electrical controls, electric motors, switching equipment, fuse boxes, medical equipment, electrical wireways, terminal boxes, scientific and measuring instruments, telecommunications equipment, control panels for manufacturing and processing equipment.

Package: 10/carton

Product Data Sheet

111.pdf

Safety Data Sheet

Tech Data & Approvals

Canada Approval



EcoSonic® VpCI®-125 Static Dissipative Film and Bags

Description: EcoSonic® VpCI®-125 Static Dissipative Film and Bags are unique in their ability to prevent corrosion and ESD damage. This film combines the most effective multi-metal corrosion protection with strong static dissipative properties. Cortec® VpCI® films and bags replace conventional rust preventatives such as oils and desiccants, allowing your product to be used immediately without cleaning or degreasing. EcoSonic® VpCI®-125 bags effectively protect components from electrostatic discharge.


Package: To ensure best product performance, store in original packaging, indoors, and out of direct sunlight at 40-100 °F (4-38 °C).


Product Data Sheet

EcoSonic-VpCI-125.pdf

Safety Data Sheet

Tech Data & Approvals

FDA Information



VpCI®-133

Description: Standard Size is 1” x 1” x ¼” (2.5 cm x 2.5 cm x 0.64 cm).
Protects up to 0.5 cubic feet (0.014 m³) per unit and has adhesive backing and release paper. Other sizes available upon request.

METALS PROTECTED (Multimetal): • Aluminum • Galvanized Steel • Brass • Solder • Carbon Steels • Silver • Copper • Zinc

Protection: Up to 0.5 cubic feet (0.014 m3) per unit.

Product Data Sheet

133.pdf

Safety Data Sheet

Tech Data & Approvals

SGS Report: English



VpCI®-137

Description: VpCI® impregnated foam rolls 130' (L) x 54" (W) x 1/4" (H) (39.6 m x 137.2 cm x 0.685 cm). Multimetal, non-toxic and nitrite free. Meets MIL-PRF-81705D for static dissipative foams.

Protection: 10 ft.3/ft.2 (0.28 cubic meters)

Package: One roll per carton

Product Data Sheet

137.pdf

Safety Data Sheet

Tech Data & Approvals

SGS Report: English



VpCI®-150 Adhesive Backed Foam Tape

Description: Multifunctional VpCI® impregnated foam. Provides corrosion protection, cushioning and static-dissipative properties. Multimetal, non-toxic, nitrite free. 12' L x 3/4" W x 1/4" H (3.7 m x 19 mm x 6 mm).

Protection: 0.4 ft.3/in. (.005 cubic meters)

Package: 6 rolls/carton.

Product Data Sheet

150 & 170 Adhesive Foam Tape.pdf

Safety Data Sheet



VpCI®-170 Adhesive Backed Foam Tape

Description: Foam Tape 20' L x 2" W x 1/4" H (6.1 m x 51 mm x 6 mm).

Protection: 1.0 ft3/in. (.03 m3/cm).

Package: 1 roll/carton.

Product Data Sheet

150 & 170 Adhesive Foam Tape.pdf

Safety Data Sheet


© Cortec Corporation - All Rights Reserved.

Content
CortecVCI.com Cortec Coated Products Cortec Spray Technologies Cortec Advanced Films Eco Cortec CorteCros Biocortec.com MetalWorking Solutions CorteMCI.com Cortec Packaging Milcorr.com - Asset Preservation System Water Treatment Solutions VpCI for Electronics MetalWorking Solutions VpCI Process Additives Cortec CorroLogic EcoFilm Rawn America Bull-Frog Boris Miksic